PRODUCT INFORMATION
The Centurion Vantage Vx SMART Controller PCB and bracket is a SMART control unit for Vantage swing gate motors, ranging from 400mm to 500mm linear operators, single to double light-domestic swing gates to light-industrial swing gates.
This unit can be used as a replacement of an existing Vx SMART PCB or installed into to the old Vantage wall box units to upgrade the system to the new Vx SMART operating system. The PVC mounting bracket supplied with the Vx SMART controller must be used to mount the new PCB into the old Vantage wall box.
FEATURES OF THE VANTAGE VX SMART CONTROLLER:
- Interactive graphic user interface via a smartphone application
- Automated setup of gate endpoints (limits)
- Independently-adjustable motor speed in both opening and closing directions
- Fail-safe collision detection and auto-reverse (adjustable sensitivity)
- Smooth, adjustable start/stop (ramp-up/ramp-down)
- Multiple operational modes
- Selectable, adjustable Autoclose
- Pedestrian (partial) opening
- Positive Close Mode
- Supports up to three sets of Photon SMART Safety beams
- Independent safety inputs for opening and closing beams (wired)
- Automatic beam test for both opening and closing beams (wired)
- Advanced lightning/surge protection
- Onboard NOVA code-hopping radio receiver with full channel-mapping capability (1500 MyCentsys Remote users (Multiple buttons per remote can be used).
SPECIFICATIONS OF THE VANTAGE VX SMART CONTROLLER:
| Maximum motor current per channel | 15A (fused) |
| Maximum input voltage | 14.4V DC |
| Standby current draw | 51mA (2) |
| Maximum solenoid current draw | 3A DC / AC (10 Seconds) (1) |
| Maximum axillary output current | 3A (Resettable Electronic Fuse) |
| Collision detection | Current sense and optical |
| Position and trajectory control | Optical |
| Temperature range | -20°C to +60°C |
| Onboard receiver type | Code-hopping multichannel |
| Receiver code storage capacity | 1500 transmitters |
| Receiver frequency | 433MHZ |
| Product Dimensions | |
| Product Weight | |
| Packaging Dimensions | |
| Mass of unit packed | |
| Warranty | 24 Months limited Manufacturer's warranty |
Additional information pertaining to the Vantage Vx SMART Controller:
1. Limited by charger, ensure that load does not prevent battery from fully charging.
Continuous current draw should ideally be less than 500mA but must not exceed 1A.
2. Operators connected, no ancillaries fitted
Warnings and Limitations on the Vx SMART Controller:
1. All installations must be done by a suitable qualified technician
2. Under no circumstances may any of the components be modified.
WHAT’S IN THE BOX:
1 x Centurion Vantage Vx SMART Controller PCB
1 x Centurion Vx SMART Controller Mounting Bracket
Limitations:
The images shown are for illustrative purposes only. Actual product may vary slightly.