PRODUCT INFORMATION
The Nemtek Electric Fence High Volt Timed Light Dark Grey is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.
The frequency of the flashing LEDs on the timed fence light indicates the voltage level on the fence. The longer the period between flashes, the lower the voltage on the fence. The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage.
Product code: SR-FLTLG
FEATURES OF THE TIMED FENCE LIGHT:
- Dark grey fence light for galvanised and aluminium wire
- Visible from up to 1km at night and 100m during the day
- No batteries required – uses minimal power from the fence
- Highly visible LEDs allow for a 160-degree viewing angle. This allows the light to shine into the secure area only
- Can operate from 0.9kV to 12kV
- Can be used with most electric fence energizers
- Indicates power on the fence for peace of mind
SPECIFICATIONS OF THE TIMED FENCE LIGHT:
| Material | Plastic and watertight compound |
| Steel wire connectors | Galvanised (Grey housing) |
| IP rating | IP67 |
| Flashing Rates | Flashing normally rate over ~7.5kV |
| Flashing at 25% slower than normal between 7.5kV~3kV | |
| Flashing at 50% slower than normal between 3kV~2.5kV | |
| Flashing at 75% slower than normal when less than ~2.5kV | |
| Product Dimensions | 83mm (L) excluding wires x 23mm (W) x 20mm (H) |
| Product Weight | 55g |
| Packaging Dimensions | 295mm (L) x 105mm (W) x 60mm (H) |
| Mass of unit packed | 80g |
| Warranty | 12 months limited Manufacturer’s warranty |
WHAT’S IN THE BOX:
1 x Nemtek Electric Fence High Volt Timed Light Dark Grey
Limitations:
The images shown are for illustrative purposes only. Actual product may vary slightly.
Section
Drop element here!